Walk-in composite salt spray test chamber HTC-3600-CCT

Product introduction:
The walk-in compound cycle corrosion test box is mainly for controlling salt spray, temperature, humidity, condensation and spraying, etc. It is mainly for large products, such as aviation, high-speed trains, automobiles, casings, battery packs, solar panels, etc. Salt spray test and CC T composite salt spray test for large workpieces and tooling equipment.

The test standards are as follows:
German Volkswagen Test Standard PVW 1210 (VW) General Motors Standard GMW14872, GM9540P Ford Standard CETP00.00-L-467
VOLVO Car Standard VCS1027
American Society for Testing and Materials ASTM G85- -94 A3
Japan Automobile Manufacturers Association Standard JASOM610-92 Nissan CCT test standard IV
IS0-9227-2015, GB/T-1025 -2012GB- -2423-17 1818- and other standards

Advantage:
1. The refrigeration adopts a separate design of the refrigeration system and the spray system, including anti-corrosion refrigeration components, and a touch control system.
2. The double-door design is conducive to placing large samples
3. Non-reaction doorknob switch, dry seal with sealing strip
4. Two-layer sample placement design and inverted trapezoidal inner box design
5. Thermally stable, high-performance salt spray atomizing nozzle
6. Precision salt mist collection device
7. The automatic air purge device is interlocked with the top cover
8. Independent research and development of programmable controller interface

Specification: