Vertical Optical Profile Projector Precision Measuring Tools , Carries Handles and Coordinate

Vertical Profile Projector Precision Measuring Tools,Carries Handles and Coordinate

How to Setting up the main unit and removing the carrying handles.

Removing the carrying handles: after setup, remove the carrying handles and cover the screw holes with the supplied hole caps.

The projector must be set up on the optional stand or rigid, stable mount. Use the leveling bolts on the projector based to compensate for any inclination.

Features:

• Imported high light and long using life LED illumination ,to ensure precision measurement demand;
• High resolution optical system with clear image and magnification error is less than 0.08%;
• Powerful Bi-axial fan cooling system,highly increase using life;
• Powerful and colorful DRO DP400,realized fast and accurate 2D Measurement;
• Built-in Mini-printer, can print and save data;
• With standard 10X objective, optional 20X,50X,100X objective,rotary table, foot switch ,clamp, etc.

The parts name of the main projector as follow:

1.2 Technical Parameters

1.3 Objective Lens

1.4 Instrument Illumination

1.4.1 Transmission illumination:3.2V,10W LED(Light gathering system)

1.4.2 reflex Illumination:3.2V,10W LED(Optical fiber lighting)

1.4.3Cooling:Forced Cooling(Transmission with an axial fan, reflective with an axial fan)

• The instrument should be placed in a clean and dry room (room temperature 20 º C ± 5 º C, humidity less than 60%), to avoid the surface of optical parts moldy, rust metal parts, dust debris fall into the instrument guide, the optical system image quality and equipment Of the measurement accuracy.
• Optical parts surface should be kept clean, not touching, above the dust with a soft brush pen. Such as the use of surface stains more effect, can use absorbent cotton or lens paper dipped in a little two toluene or alcohol ether mixture and gently wipe