Payment & Shipping Terms:
|Power Supply:||AC 220V，1Ф, 50HZ||Test Method:||NSS, ACSS, CASS|
|Laboratory Temperature:||(NSS ACSS) Test Temperature: 35℃±1℃/ (CASS) Test Temperature: 50℃±1℃||Temperature Range:||10-80℃|
|Interior Dimensions:||1000mm*700mm*600mm||Test Fluid:||Purified Water (or Deionized Water) + Sodium Chloride|
|Compressed Air:||40-120 Pai (Bring Your Own Air Compressor)|
The CCT composite cyclic corrosion test chamber can perform traditional salt spray, dry and wet alternate salt spray tests and most automobile cyclic corrosion tests.
Specially designed and assembled functional modes such as salt spray, condensing humidity, relative humidity control, air drying, salt water immersion, automatic spraying, rotating spraying, low temperature, etc., according to the speciﬁcation requirements, testing metal parts, electrophoretic coating parts, paint coating parts, Electronic components, etc.
1. The box body is a comprehensive anti-corrosion structure, using multi-layer glass ﬁber polyester resin box body, made of corrosion-resistant materials.
2. Touch screen programmable controller, can operate in Chinese and English, and collect data.
3. The speciﬁc nozzle can evenly spray the solution on the sample, and the ﬂow rate of the solution can be adjusted by itself
4. The nozzle is installed on a separate module and can be easily removed when the atomization function is enabled.
5. The spray liquid area is large, the ﬂow rate is high, and the spray time is shorter than the time of atomizing the solution under the salt spray function.
6. The spray on/off time can be directly programmed to better control the corrosion rate.
7. Provide a standard test sample bracket, which can accommodate ﬂat samples. For oversized and overweight three-dimensional samples (such as automobile wheels, engine parts, etc.), grill kits with the same height as the bracket can be used. The cabinet has a solid structure and can evenly distribute the load.
|Inner dimension (L*W*H)mm||1000*700*600||1350*850*1200||2100*950*1250|
|Outer dimension (L*W*H)mm||1560*1000*1350||2160*1200*1450||2711*1150*1970|
|Test fluid||Purified water (or deionized water) + sodium chloride|
|Power requirements||220V 50HZ, Other voltage power supply can be controlled on request|
|Compressed air||40-120 Pai (Bring your own air compressor)|
Contact Person: Mr. Marshall Zheng