Payment & Shipping Terms:
Vickers Hardness Testing Machine,
Vickers Hardness Testing Equipment
High Sensitive LCD Monitor Digital Vickers Optical Hardness Tester Machine
Vision Hardness Measuring System is a set of video measurement device to update the traditional optical Brinell hardness tester, Vickers hardness tester, Micro Vickers hardness tester, and Knoop hardness tester as vision hardness tester, it is composed of Eyepiece-Measuring-Camera: #823-811 and Display Monitor: #823-821.
When the optical hardness tester is equipped with this device, the indention is displayed on the monitor #823-821 magnificately, the indention will be observed by many inspectors simultaneously, it makes the measurement of indention more intuitively and accurately, and it reduces operator’s eye fatigue and error to improve the work efficiency obviously.
Color Touch Screen Digital Vickers Hardness Tester
Lens & Indenter Switch
Support Bluetooth Printing
Auto Loading, Dwell and Unloading
Magnification of Objective
Observation: 10x/40x; Measurement: 10x/40x
HRC, HV, HBS, HBW, HK, HRA, HRD, HR15N, HR30N
HR45N, HS, HRF, HR15T, HR30T, HR45T, HRB
10x Digital Eyepiece
5.2" Touch Screen, Resolution 640*480
Adjustable halogen lamp (Optional LED Illumination)
Max height of Specimen
ASTM E92, ISO6507, GB/T4340, JIS Z2245
The Vickers hardness test method consists of indenting the test material with a diamond indenter, in the form of a right pyramid with a square base and an angle of 136 degrees between opposite faces subjected to a load of 1 to 100 kgf. The full load is normally applied for 10 to 15 seconds.
The two diagonals of the indentation left in the surface of the material after removal of the load are measured using a microscope and their average calculated. The area of the sloping surface of the indentation is calculated. The Vickers hardness is the quotient obtained by dividing the kgf load by the square mm area of indentation.
The Vickers hardness should be reported like 800 HV/10, which means a Vickers hardness of 800, was obtained using a 10kgf force. Several different loading settings give practically identical hardness numbers on uniform material, which is much better than the arbitrary changing of scale with the other hardness testing methods.
The advantages of the Vickers hardness test are that extremely accurate readings can be taken, and just one type of indenter is used for all types of metals and surface treatments. Although thoroughly adaptable and very precise for testing the softest and hardest of materials, under varying loads, the Vickers machine is a floor standing unit that is more expensive than the Brinell or Rockwell machines.
Contact Person: Mr. Marshall Zheng