Hand Held Rockwell Hardness Tester Durometer 3N / 10N / 50N Optional

Portable Rockwell Hardness Tester Heat treat Hand-held probe POT-H1
 
 
Why POT:
 
Rockwell hardness tester is suitable for measuring specimen with mid-high hardness. Brinell hardness tester is fairly suitable for soft material. But Vicker hardness tester could measuring kinds material from soft to hard. The traditional Vickers hardness tester due to limit of the optical mechanism and mechanical mechanism, it can not be applied to the scene of large parts for non-destructive measurement. And the Lee hardness tester and ultrasonic hardness tester are compared to the hardness of Titanium and other new materials can not be accurate measurement, in particular, the Lee hardness have higher requirement of the specimen thickness and roughness. Therefore, POT is a portable mini Vickers hardness tester, which will be the traditional desktop Vickers hardness tester into a hand-held probe inside, can easily carry, at any time in the laboratory, production workshop, field workstations on the specimen Vickers hardness measurement.
 
POT Advantages – your benefit:
 
POT can be used irrespective of the material – without any additional calibration. You can use the same instrument to measure the hardness of all sorts of materials without any reference specimen and without any laborious settings: from steel and nonferrous metals through plastics, carbide metals, glass, and ceramics up to different coatings. The static application of the test load reduces the vibration of the test object and therefore the influence of the test material’s elastic properties on the test result.
 
POT Extensive fields of application:
 
POT‘s standards in mobile hardness testing: tests are not only independent of the test position and direction of testing but in this case also of the test object’s material and mass or geometry. Hereby the POT opens up a large variety of new application fields which were previously not open to portable hardness testers.